TechnologySchenker Qube 30 supplies motorboats with fresh water

Hauke Schmidt

 · 07.10.2026

The Qube 30 is a relatively flat and compact unit.
Photo: Schenker
The Schenker Qube 30 is designed to produce 30 litres of fresh water per hour from seawater – whilst consuming 110 watts of power. Thanks to its compact dimensions, it is also a good option for smaller boats.

Topics in this article

A night at anchor, several showers after a swim, and still enough water for the galley: the capacity of the fresh-water tank quickly becomes an issue. The Qube 30 is designed for small to medium-sized boats with three to four people on board.

What 30 litres per hour means on board

The Qube 30 was unveiled in early October 2026 at the Genoa Boat Show. According to the manufacturer, it has a nominal fresh water output of 30 litres per hour and requires 110 watts. The BOOTE overview of watermakers explains just how far you can go with that level of system performance.

Compact dimensions

Schenker describes the Qube 30 as a compact unit. Measuring around 74 × 26 × 21 centimetres, the watermaker is indeed small. However, the separate water pump should also be taken into account. The Qube range According to the manufacturer, it utilises energy recovery and operates at 12 or 24 volts. With Zen 30 and Smart 30 Schenker already has two models in the same nominal flow rate class in its range. The Qube 30 adds another design to this selection. A confirmed German list price is not yet available.

Technical Specifications

Nominal flow rate30 l/h
Power consumption110 W
Supply12 or 24 V
Planned crewServes 3 to 4 people
Dimensions of the watermaker unit (W × H × D)73.5 × 25.5 × 20.8 cm
Weight of the watermaker unit18.1 kg
Dimensions of the separate pump (W × H × D)28.8 × 21.3 × 17.8 cm
Weight of the pump unit4.4 kg

Further articles on this topic

The following shows which types of construction and installation issues are important: “Watermakers: These are the systems available”. Explains how to maintain the existing water supply ‘How to keep the water tank free from germs’ the risks associated with long periods of inactivity.

Would you fit a watermaker with a capacity of 30 litres per hour to your motorboat, or would a larger fresh-water tank be sufficient? How important are space and power consumption in this decision? Join the discussion.

Share article:
Hauke Schmidt

Hauke Schmidt

Test & Technology editor

Hauke Schmidt was born in Hanau, Hesse, in 1974, but moved to the coast at the age of an Opti and grew up sailing dinghies and tall ships. School and semester breaks were used for extensive Baltic Sea cruises. During and after his oceanography studies in Kiel, he took part in various international research trips to tropical and polar regions. The focus was on ocean currents and their influence on climate change. Eventually he was drawn back to his home coast and to YACHT. He completed a traineeship there and has been working as an editor in the Test & Technology department since 2009. His core tasks include equipment and boat testing, as well as practical topics relating to electronics, seamanship and refits. As a passionate DIY enthusiast, he loves to spend his summers on the water with his family and winters working on his boat

Most read in category Equipment